Skip to product information
1 left
X Prime PPX - 55 Prime HS Primer / Surfacer
$124.99
PPX-55 HS High BuildPrimer / Surfacer
PPX-55 is a two component Urethane Primer formulated to be applied as a High Build Primer or Final non-sanding wet-wet sealer.
It is ideally suited for use in Automotive, Fleet, Industral, Marine and Aerospace re nishing applications.
PPX - 55 offers excellent filling properties, fast dry, superb adhesion, very easy sanding and superior color hold out.
Fast Free Reliable Shipping
Proudly Made in U.S.A.
- Manufactured and blended in the U.S.A.
Preparations
- Wash painted surfaces thoroughly with soap and water to remove water-soluble contaminations.
- Use appropriate Cleaner
- Sand with 400 - 600 grit sand paper.
- Using other Manufactures Primers & Sealers, refer to their product tech sheets for over and under compatibilities
Mixing Ratio
- Standard Mix : 1 Part Basecoat to 1 Part Reducer.
- Standard Mix Pot Life : Up to 12 Months or longer
- Activated Mix : Use .75 ounces per ready to spray Quart. 1 Part Basecoat to 1 Part Reducer. Stir to combined then add .75 ounces of Activator per mixed Quart and stir again till combined.
- Activated Pot Life : 2 hours when mixed.
Application
- 2 -3 coats or until hiding is achieved.
- 5 - 10 minutes at 70 F with at 1:1 Reducer Mix
10 - 15 minutes at 70 F when activator is used - Dry times to clearcoat at 70 F - 1:1 mix is 15 - 20 Minutes. 12 - 24 hours maximum to clearcoat.
- Dry times to clearcoat at 70 F with Activators
30 Minutes - 4 Hours. After 4 hours,
basecoat must be scuffed and recoated